Audio Technica ATH-CKS5TW True Wireless Earphones

Audio Technica ATH-CKS5TW True Wireless Earphones

SGD 218.00
Member Price: SGD 196.20
Rating:
0% of 100

Login as Stereo Member to purchase at special member price! Click here to sign up.

FREE Standard Shipping
available for this item

Shipping Calculator

Audio Technica ATH-CKS5TW
True Wireless Earphones

A SOLID BASS
  • Sound that allows you to hear the deep bass sound completely wirelessly. 
Freed from the cable, you can enjoy sharp bass playback with unprecedented flexibility.
Seamless music experience with auto power ON / OFF.
  • 
Simply remove the headphones from the charging case and you are ready to listen to music. The power turns off when headphones are attached to the case.
Play 15 hours of innovation on a single charge
  • 
Up to 45 hours of playback * is possible with a charging case.
* Depends on usage conditions.
Put the headphones in the charging case and close the lid to start charging.
  • The charging status is indicated by the LED indicators on the headphones and charging case.
Can be operated with headphones only.
  • You can control music, call / end call, and volume control with just headphones without using a smartphone.
Massive Bass Sound.
  • 
Audio Technica's uncompromising acoustic design provides deep bass with thickness and impact even in a fully wireless small body.
Newly designed large screwdriver with φ10mm that uses two layers of diaphragms.
  • Combining materials with different hardness (PEEK + TPU) to the diaphragm, the thickness of the bass and the clarity of the mid-high range are highlighted.
Newly designed completely wireless earpiece.
  • In pursuit of excellent isolation and a stable fit, we designed a dedicated earpiece for complete wireless. Thin and flexible silicone earpieces provide an excellent fit. In addition, the sound shape is improved by the radiation shape design, ensuring high sound quality to the ear.Newly designed completely wireless earpiece. 
In pursuit of excellent isolation and a stable fit, we designed a dedicated earpiece for complete wireless. Thin and flexible silicone earpieces provide an excellent fit. In addition, the sound shape is improved by the radiation shape design, ensuring high sound quality to the ear. 

Dedicated designed 3D loop support.
  • Adopted silicon loop shape. Increases the sense of hold on the ear by hanging firmly inside the ear.
Compatible with smartphone application "Connect".
  • You can easily change the codec such as headphones settings and aptX, and if you lose your headphones, you can check the location of the last Bluetooth connection on the map.
Enrich your everyday listening.
  • With this app, you can use compatible Audio-Technica products more conveniently. 
The app includes various guides to help first-time Bluetooth users, and customization tools to easily adjust the settings on Audio-Technica products.




Confirm the product's usage status, such as the battery level and current codec, at a glance.
Customize A-T products according to your preferences with simple setting selections.
Display on a map where your product was disconnected. Play a sound from the product when you ’re nearby but ca n’t find it.

How to do a Reset?


Troubleshooting

Problem/Solution

Power is not supplied: Charge the product

Unable to pair:

  • Confirm that the Bluetooth device communicates using Ver. 2.1+EDR or higher.
  • Place the product and the Bluetooth device within 1 m (3.3') of each other.

  • Set the profiles for the Bluetooth device. For procedures on how to set profiles, refer to the Bluetooth device’s user manual.

  • Remove the pairing information for the Bluetooth device then pair the product with this device again.

  • Place the headphones in the charging case and close the cover. Then, take the headphones out again.

  • When switching to a new Bluetooth device, you may not be able to pair because the previously connected Bluetooth device cannot be disconnected. In such cases, place the headphones into the charging case (with battery level remaining for the case) and long touch (about 4 seconds) the touch sensor area on the R (right) side. The indicator lamp flashes in white. After it flashes in white, long touch (about 2 seconds) the touch sensor area on the R (right) side. After the L (left)/R (right) indicator lamps light in red, they turn off and then light in white. If you remove the headphones from the charging case in that state, the product will switch to the “searching for devices” state and you will be able to pair with your desired Bluetooth device. Perform these operations within 30 seconds of placing the headphones into the charging case.

No sound is heard / Sound is faint:

  • Turn on the power of the product and the Bluetooth device.

  • Turn up the volume.

  • Make sure that this product and Bluetooth device are connected by the A2DP (or audio connection).

  • Disable pairing for this product and the Bluetooth device, then pair the product with this device again.

  • Move away from obstacles between the product and the Bluetooth device, such as people, metal or walls, and place the product and device closer together.
  • Switch the sound output of the Bluetooth device to this product.

L (left) and R (right) are not connected (sound does not come out from the L (left) side).

  • Check if there is no battery level remaining.

  • Place the headphones in the charging case and close the cover. Then, take the headphones out again.

  • If they are not connecting even after trying the above, the L (left) and R (right) may be disconnected. Use the following procedure to connect them manually (this procedure can be performed only when the L (left) and R (right) are disconnected).

With the headphones and Bluetooth device disconnected, touch the touch sensor areas on both the L and R (left and right) sides twice. The indicator lamps on both the L and R (left and right) sides will change to quickly flashing in pink, and after a while, the indicator lamps on both the L and R (left and right) sides will slowly flash in white to indicate that the L (left) and R (right) are connected.


Sound is distorted / Noise is heard / Sound cuts out.

  • Turn down the volume.

  • Keep this product away from devices that emit radio waves such as microwaves and wireless routers.

  • Keep this product away from TVs, radios, and devices with built-in tuners. These devices can also be affected by the product.

  • Turn off the equalizer settings of the Bluetooth device.

  • Remove obstacles between the product and the Bluetooth device and place them closer together. For details, please refer to "For a more comfortable Bluetooth® communication experience”.

  • You may be able to improve the connection status by switching the connection codec to SBC. If you are using a connected device such as a smartphone or audio player that can change the connection codec, you may be able to set to SBC on that connected device. For details about the setting procedure, refer to the user manual of your connected device. 
  • Refer to “Turning SBC priority connection mode on or off” and change the connection code to SBC.

Cannot hear the voice of the caller / Voice of the caller is too quiet.

  • Turn on the power of the product and the Bluetooth device.

  • Turn up the volume.

  • Make sure that this product and Bluetooth device are connected by the HFP/HSP (or call connection).

  • Disable pairing for this product and the Bluetooth device, then pair the product with this device again.

  • Switch the sound output of the Bluetooth device to this product.

The charging case cannot be charged. Headphones cannot be charged.

  • Securely connect the included USB charging cable and charge the product.
  • Make sure that the product is placed in the charging case correctly. 
  • Charge the charging case.

  • Wipe dirt off the charging terminal with a dry cloth.

The ear detection does not work.

  • Check if the ear detection is on. It is turned off at the time of purchase.
  • Wear the headphones properly on your ears.

  • After removing the headphones from the charging case, check that the indicator lamps on the headphones are flashing (ready to use) before wearing them. The ear detection may not work correctly if the headphones are worn while the indicator lamps are not flashing. 
  • For details about how to operate your Bluetooth device, refer to the device’s user manual.

  • If the problem still remains, reset the product. To reset the product, refer to “Reset function” (p.17) under “Using the product”.


How to reset the Audio Technica ATH-CKS5TW True Wireless Earphone
  • If the product does not work, or other malfunctions occur, place the headphones in the charging case. Inserting the USB charging cable to provide power, and then do a reset. Disconnecting and then reconnecting the USB charging cable will reset the product and should resolve any problem you are experiencing. If the problem persists, contact Audio Technica Service Centre.

  • Resetting does not change any of your settings (pairing information, volume setting, etc.).
Specifications
Earphones
  • Driver Type: Dynamic
  • Drive Size: 10mm
  • Sensitivity: 110dB/mW
  • Frequency Response: 5~40,000Hz
  • Impedance: 16Ω
  • Water-resistant - IPX2 (Only Earphones)
Microphones
  • Type: MEMS
  • Polar Pattern: Omnidirectional
  • Sensitivity: −40dB (1V/Pa at1kHz)
  • Frequency Response: 50~4,000Hz
Bluetooth
  • Bluetooth Version: Ver.5.0
  • Maximum Communication Range: Line of sight - 10 m
  • Compatible Bluetooth Profiles: A2DP?AVRCP?HFP?HSP
  • Support Codec: Qualcomm® aptX™ / AAC / SBC
Battery
  • Headphones: DC3.7V lithium-ion
  • Charging case: DC3.7V lithium polymer
Battery life
  • Headphones: 15 hours
  • Charging case: Additional 30 hours
Charging time
  • Headphones: 2 hours
  • Charging case: 3.5 hours
Weight
  • Headphones: 8g x2
  • Charging case: 60g
Write Your Own Review
You're reviewing:Audio Technica ATH-CKS5TW True Wireless Earphones
Your Rating

Ask a Question